Categories
Industrial Services

Diverse methods used in the making of glass art for sculpting

When it comes to the current world of fast moving and quickly developing industries, the world of art is no different too. From Da Vinci to very modern artists making their debut, the diversity of art making varies incredibly all around the world. Sculptors made of glass has become quite a trend in the world as of now and its common to see a lot of young adults engage in this sculpting side of art.

Though it sounds particularly easy, it is not so. The sculpting might not be that hard to do once you have a hold on it, but making the glass for sculpting is a whole different story.

Etching Glass

 This is when glass is made by “etching” away at the surface. This procedure is more commonly identified as frosting of glass as well. There are two main forms of etching glass. They are; acid etching and sandblasted glass. Sand blasting in Sydney is when a rough or hard blast medium selected for its specific use is blasted at a surface with hot, steamy air. Acid etching is when a certain form of acid like hydrofluoric acid is applied on a surface. Usually, acid etching could be a bit dangerous than sand blasted glass.

Use of flame works

This is mainly used in “lamp working” Usually, pre – produced borosilicate glass is molded into tubes or rods. These glass tubes and rods made of borosilicate are then melted under high heat using machines such as a bench torch. In this category of glass, hot metal spray is also seen to be used. This type of glass art is mainly and more widely used in the making of jewelry items, delicate ornamental items or even small glass figurines to be sold. The reason that borosilicate glass is used ere is because it can withstand high temperatures without cracking or giving away which makes flame works very popular.

Warm Glass

This is a process that involves the melting of glass in a kiln or an oven under very high temperatures. When it comes to warm glass, there are two most common methods known as slumping glass or fused glass. Slumping glass happens when a sheet of glass is heated in a kiln around 1200 to 1400 degrees Celsius, which is just enough for the glass to bent or slightly move and then is placed in a mold. Fused glass is placed in higher temperatures like 1400 – 1600 degrees Celsius and sheets of glass are usually melted together to fuse. This method is a very popular form of glass art.

Categories
Industrial Services

Why Asbestos Inspection Is Important

Various types of asbestos are readily available in the market and are mainly used in a number of construction purposes both in the residential areas and also in the commercial purposes. Asbestos inspection is a method that is commonly used to check for the level of microscopic asbestos in the homes and also in offices to avoid various health hazards. This process should be done regularly because when left unchecked, asbestos contamination can be a serious health hazard as it is capable of causing cancer and may other dangerous diseases.

Asbestos is commonly used in the manufacture of building materials because it is highly resistant to fire and is capable of providing perfect insulation. It is also very resistant to chemical attacks. When in good condition, this material is very safe, but after experiencing wear and tear, the fibers are capable of floating in the air and get inhaled by people who are in those specific buildings or in the surrounding area.

Many people die each year just because of asbestos contamination. This is has made the inspections to be made mandatory to make sure that people are not exposed to asbestos fence removal doses of asbestos. Most effects of the asbestos exposure are not seen immediately and may be seen years after the exposure. Asbestos exposure is the leading cause of four diseases. The diseases include: lung cancer, asbestosis, mesothelioma and also diffuse pleural thickening. When breathed, the asbestos normally gets trapped in the lungs and it is capable of staying there for a very long period of time eventually resulting to tissue inflammation which is the first symptom of a serious health complication. It is therefore very important to make sure that after the inspection is done, asbestos removal is performed where necessary.

It is therefore not advisable to ignore the normal tear and wear of the buildings, either on the ceilings, walls, floors and many other places. Asbestos effects are more serious to small children, who after being exposed may suffer the effects of the poisoning at the prime of their lives. Asbestos professionals are the only people who are required to perform the inspection and determine the level of the asbestos content in your building.

Asbestos removal also applies to asbestos garage removal which is performed on garages. The removal is divided into four classes. Class one is the most dangerous of the asbestos abatements and their disposal includes the thermal system insulation and also asbestos materials. Class two includes the removal of all materials that are not used in thermal system insulation. The materials may include roof tiles, floor tiles and the mastics that are normally used in the construction industry. Use this link if you are looking for a company you can contact regarding asbestos at Savana Environmental Australia Pty Ltd at your house or even at your workspace.

Class three mainly involves the repair and also the maintenance of thermal system insulation and also the eventual surfacing with the asbestos material. This is normally done when the material containing the asbestos is disturbed something that may cause asbestos exposure.

Class four includes the repair and also the maintenance of the asbestos materials without disrupting them. This also includes the removal of all the debris that was generated when doing class one to three removal jobs. These jobs should only be done by professionals only because they have the technical know how of how to perform them safely.